With the help podshivnyh and false ceilings it is possible to improve aesthetic qualities of a lobby or a corridor.
The Decorative ceiling in a lobby can be made of the boards located vertically in relation to overlapping. For this purpose on perimetre of a premise by means of screws to stoppers or djubeljam in a wall attach bruski section 30X50 mm.
On bruski on an edge establish boards in the length equal to width of a lobby, section 19X150 mm. Distance between boards of 150-200 mm. On the left side bruskov boards fix screws (fig. 39).
In other variant of a board in width of 400 mm settle down horizontally with step of 200 mm and fasten to bruskam nails or screws with secret heads. Over boards light sources settle down. That they were not visible between boards, they can be made of 80 mm with boards in height of an order.
In premises with high ceilings, more often in lobbies in houses of old building, there is a necessity to reduce premise height. In this case arrange false ceilings, which as well as walls revet with boards on a wooden skeleton.
Bearing skeleton of false ceilings carry out or from wooden bruskov and reek, or from a steel wire in diameter of 6 mm to which attach bars. The lining of heat-sound-proof materials between overlapping and facing allows to improve comfortable conditions of a premise.
The Steel wire is necessary for painting oil or other paint. An obverse surface of boards cover with a transparent varnish or paint not water paints.
a Fig. 39. The device decorative and false ceilings from a tree :
And - trellised decorative ceilings; - a false ceiling with application under vesok from wooden bruskov with facing by boards; in - a false ceiling on under vesnah from a wire in diameter of 5-10 mm; g - a ceiling from N-shaped wooden elements with the device of the latent illumination