painting and decorating is repair-painting and decorating repair and painting and decorating repair and furnish furnish and repair

Paint and varnish materials of factory manufacturing (ch. 2)

Oil paints let out or in a kind gustotertyh pastes which lead up to painting viscosity on a work place, or in the form of ready to the use which before use only carefully mix that there was no deposit.

Oil paints represent a mix from pigments, napolnitelja and drying oils. Drying oil happens vegetative or artificial.

Oil paints name on a pigment. For example "РѕЁшъ iron ¦+-011" "+§Ёр ¦+-011" "¦ѕьш  ¦+-015" etc. the Paints ready to application, designate marks МА-15, МА-15Н, МА-22, МА-25. Paints with figure 2 are got mixed up on drying oil "+ъёюыі" and with figure 1 - on natural drying oil. Figure 5 means that in paints the combined drying oil is used.

All oil paints apply to colouring of various surfaces by brushes or platens usually in two layers. Along with oil in considerable volumes are issued alkidnye paint and varnish materials, plenkoobrazovatelem in which serve alkidnye polymers. Depending on a pitch kind distinguish gliftalevye and pentaftalevye the binding.

One of the most popular paint and varnish materials on gliftalevoj to a basis is first coat ГФ-021. It is intended for preparation both metal, and wooden surfaces under a covering by various paints, enamels, varnishes.

Are issued and gustotertye paints on alkidnyh drying oils. Paints concern them "+И-013 iron ёѕЁшъ" "+И-013 ю§Ёр" "¤И-014 ьѕьш " etc.

On gliftalevoj and pentaftalevoj to a basis the wide assortment of enamels and the varnishes which characteristics are resulted more low is issued also.

Now in sale paints as raw materials for which rosin serves arrive also. Such paints concern КФ-235 and КФ-236 for colouring of timber floors, and also paint КФ-287 for the wooden products maintained in premises, except for floors. All these paints are made of oil-kanifolnogo varnish and in the operational qualities surpass the oil.

Paints on the basis of oil-rubber drying oil of marks Are of interest also: МК-1 it is intended for furnish both internal, and external surfaces from various materials, МК-2 has more limited range of application, it paint the surfaces maintained only in premises.

Enamels let out, as a rule, ready to the use. They consist of pigments and napolnitelej, ground with various varnishes with addition of solvent and sikkativa. Unlike oil paints by means of enamels it is possible to receive glossy and even a smooth surface.

Depending on a pitch kind of which the varnish is made, enamels let out various marks.

Enamels ХВ-1100 and XB-12S are intended for colouring of the wooden or preliminary grounded metal surfaces maintained in atmospheric conditions. Them put on a surface dispersion. The dried up enamel forms a homogeneous semimatte smooth film. Before application dilute with solvents Р-4, Р-4А, Р-5.

Enamel НЦ-25 paint preliminary grounded metal and wooden surfaces of products and the equipment, maintained in premises. Them put on a surface dispersion. Before enamel application dilute to working viscosity with solvents 645 and 646. Enamel is let out by 19 colours.

Enamel НЦ-11 is intended for colouring of metal surfaces. It is recommended to cover in the beginning metal with first coat ГФ-021, then enamel in 4-5 layers. Put enamel dispersion.

Enamel НЦ-132К is let out by 12 colours. It is applied to painting of metal surfaces. Covering system approximately the such: in the beginning first coat ГФ-021, then enamel in 2-3 layers which put a brush (on it specifies an index To in marks). Dilute enamel with solvent 649. Enamel dries up for 3 ch at temperature 18-22°Р.

Enamel ГФ-1426 before drawing dilute to working viscosity ksilolom, solventom or a mix of one of them with uajt-spiritom. After drying forms a homogeneous glossy film. Enamel a rack to water and mineral oil; it is toxic and pozharoopasna. It is intended for colouring of the grounded and not grounded metal and wooden surfaces. On a surface put a brush or a spray.

Enamel ГФ-230 apply to colouring of the metal and wooden products maintained in premises, except for floors. After drying form a homogeneous smooth semiglossy film. On a surface put a brush, the platen or a spray. Before enamel application dilute to working viscosity with gasoline, turpentine or their mix.

With Enamel ПФ-223 cover the metal and wooden surfaces which are not exposed to atmospheric influences. Enamels put on a surface (on a ground or without it) kraskoraspylitelem, a brush etc. Before enamel application dilute with gasoline, ksilolom, solventom or their mix.

Enamel ЭП-51 let out various colours. Enamels are toxic and pozharoopasny; are intended for colouring of preliminary grounded metal surfaces at operation under a canopy and in premises. Enamels put on a surface a brush or a spray. Before their application dilute to working viscosity with solvent 648. After drying the homogeneous smooth semiglossy film is formed.

Enamels ЭП-255 and ЭП-275 let out three colours: ЭП-255 - white and green, ЭП-275 - black. Deliver them completely: a half-finished product of enamel and a hardener № 1. Before application on 100 parts of a half-finished product of enamel add a hardener № 1: for enamel ЭП-255 - 5 parts, ЭП-275 - 3 (on weight). To working viscosity enamel lead up solvent Р-5. The prepared enamel should be used during 5 ch.

After enamel hardening the homogeneous semimatte film proof to influence of water, mineral oil and gasoline is formed. Apply to colouring of various surfaces. Put a method of pneumatic dispersion.

The Paint of Silal-80 is intended for external decorative and sheetings of surfaces of buildings, constructions and designs from concrete, plaster, asbestotsementa and a brick. Apply at furnish of new surfaces and repair of buildings. On a surface structure put a brush, the platen or kraskoraspylitelem. For a first coat a paint dilute ksilolom.

The Paint ieoprenovaja СКИ-3 is intended for internal and external works on concrete, plaster, wood and the grounded metal. Ground surfaces the same paint diluted uajt-spiritom. Before application a paint carefully mix, on a surface put two times a brush, the platen or kraskoraspylitelem. Time of drying of each layer at temperature 20 ®2°Р - 24 ch.

Enamel ПФ-115 intends for colouring of the external and internal metal, wooden and other surfaces maintained in atmospheric conditions. Enamel let out various colours. A covering with firmness to difference of temperatures from-50 to +60°Р, to water action, 0,5% of th solution of washing substances. Keeps protective properties in a temperate climate two-three years. Enamel put dispersion, okunaniem, jet oblivom, a brush. Solvents - solvent, ksilol or a mix of one of them with uajt-spiritom in the ratio 1:1, turpentine, thinner РЭ-4В. A drying mode: at 80°Р - 1,5 ch; at 105-110°Р - 1 ch; at 20°Р - 24 ch for first two layers and 48 - for the last. The exception makes enamel of red colour which at 20°Р dries 48 hours (each layer).

Kremnijorganichesky enamels are among the most weatherproof paints intended for external furnish of buildings. In retail trade paint КО-168 and КО-1112 now arrives.

Enamels КО-168 serve as protective and decorative coverings for concrete, asbestotsementa, a tree, a brick, the grounded metal surfaces, for furnish of external and internal elements of buildings and constructions.

Let out various colours. Put on a surface a brush, the platen or a pneumatic spray. Solvent - toluene, ksilol. Enamel dries at 15-35°Р no more than 24 ch.

Enamel КО-168БХ "ррфѕур" serves for a covering only external surfaces from a tree, a brick, concrete, asbestotsementa and the grounded metal surfaces. Let out white, mustard, red, brown, blue, light green, grey, beige, black, green colours. A covering enamel with firmness to action of light, water. Put on a surface a pneumatic spray, a brush or the platen. Solvents: butilatsetat, izobutilatsetat, etilatsetat, uajt-spirit. The covering dries at 15-35°Р no more than 20 ch.

Enamel МЧ-181 of the white paint window and door blocks from a tree and wood-fiber plates. Put a pneumatic spray or a brush. Service life of a covering enamel in a temperate climate not less than two years. Solvents: ksilol, solvent or their mix. Before application into enamel enter sikkativ НФ-1 in number of no more than 8% of weight of not dissolved enamel.

Enamel ПФ-2134 intends for painting and decorating indoors on the concrete, plastered surfaces, on old coverings (to enamels, oil and vodoemulsionnym to paints); for colouring of the wooden and metal products maintained indoors. Let out various colours. A covering enamel with firmness to action of water, solutions of washing-up liquids. Put on a painted surface a brush or the platen in two layers.

Solvents: turpentine, ksilol, a thinner for oil paints and enamels (a mix of turpentine with gasoline).

Enamel for floor ФЛ-2128 let out light brown and zolotisto-brown colours; it a rack to water action.

Put enamel a brush or the platen. Solvent - uajt-spirit or turpentine.

Enamel for floor ПФ-266 intends for a covering both painted earlier, and unpainted, but preliminary prepared timber floors. Enamel let out yellowy-brown colour, it is steady against action of washing substances and to istiraniju.

Solvents: РС-2, uajt-spirit or turpentine in number of 5% of weight of enamel.

Time of drying specified above enamels - 24 ch for each layer at temperature 20 ®2°Р.

The Paint for floor MA-2S is made on the basis of drying oil. Intends for the painted and unpainted floors and other products maintained in premises. Let out its yellowy-brown and red-brown colours. A covering this paint with firmness to action of water and to istiraniju. A paint put a brush or the platen in 2-3 layers. Solvents - uajt-spirit or turpentine. Each layer dries 48 ch at 20®2°Р.

Enamel ХВ-556 of khaki serves for colouring of metal and nonmetallic products. The covering possesses firmness to difference of temperatures (from-40 to +40°Р), atmosferostojkostju. Enamel put a method of pneumatic dispersion. Solvent - Р-4. Enamel dries 5 ch at 50-60°Р.