The Minimum set of the tool for facing works consists from kelmy (shovels of a tiler), shpatelja, a hammer, a chisel, kusachek, stekloreza, level and a plumb (fig. 29).
a Fig. 29. Tools for work on facing by tiles :
And - shpatel with a rubber tip and gear; - wide gear shpatel; in - a plumb; g - a saw (nozhovka); d - a screw-driver; in - pincers (kusachki); - a roulette; z - a shovel; m - a chisel; and - a toporik-hammer; l - a square; m - skoby; n - level; about - a shpatel-scoop
The Shovel of a tiler of usually trapezoid form with the handle, utolshchennoj on the end, serves for preparation and hashing of a solution and its drawing on a tile. SHpatel it is intended for mastic drawing. The hammer and a chisel are applied to processing of a revetted surface, and kusachki - for rough adjustment of tiles, vykusyvanija the rounded off places etc. For division of tiles into parts serves steklorez. Check of vertical position of revetted surfaces and sides, and also horizontal positions of the prepared surfaces is made by a plumb and water level. - an axe, a ruler, a cord, a rule, capacities the tools used and for other works can be necessary for a solution and water, a sponge, etc. also., and also mobile podmosti.